Introducing our high-performance LVDS (Low-Voltage Differential Signaling) interface displays, engineered for robust video transmission in medical, military, and heavy industrial controls. Operating via low-swing differential signal pairs (350mV), our displays provide extreme immunity against EMI/RFI noise while maintaining low power consumption. Supporting high-resolution dual-channel configurations with full 24-bit true color depth, they connect directly to embedded single-board computers (SBCs) and industrial controllers.
Employs differential signal pairs where external noise is coupled equally to both lines, cancelling out at the receiver end.
The low voltage swing (350mV) and balanced currents dramatically reduce electromagnetic interference (EMI) emissions.
Supports pixel clock frequencies up to 150MHz, delivering high-speed serial data transmission up to 1.4 Gbps per channel.
Tailored for direct connection to industrial single-board computers, x86/ARM motherboards, and custom FPGA controller modules.
Supports dual-channel LVDS mappings, reproducing 16.7 million colors without dithering or parallax lag.
Built using industrial-grade components with extended availability, ensuring a minimum 7 to 10-year product lifecycle.
Low-Voltage Differential Signaling (LVDS) has become the standard for embedded display panels due to its high-speed transmission and low noise characteristics. Unlike traditional TTL parallel interfaces that require dozens of pins and radiate electromagnetic noise, LVDS uses serial differential pairs to send high-resolution video over long cable lengths (up to 10 meters) using small, low-pin-count connectors. Keetronics integrates premium display drivers to guarantee noise-free, crisp performance under heavy factory floor EMI.
Industry-standard low-profile connectors with gold-plated contacts to prevent signal degradation.
Precision PCB layout with matched path lengths and 100-ohm differential impedance to prevent reflections.
Integrated memory chip holding the display's timing configuration, enabling auto-detection by host systems.
Dual control backlight dimming port for precise brightness adjustments down to 1% display brightness.
Tailor the industrial monitor enclosure, cover glass, and video card configurations to your system.