High-durability tempered glass displays and rugged monitors engineered with chemically strengthened or thermally tempered protective cover glass. Built to survive extreme industrial abuse, public vandalism, naval shock loads, and high-vibration military vehicles. Delivering Mohs 7+ scratch resistance and IK10 impact protection (absorbing up to 20 Joules of physical energy), while maintaining complete Projected Capacitive multi-touch sensitivity under rain spray, dust, or heavy work gloves. Equipped with optical anti-reflective (AR), anti-glare (AG), and anti-fingerprint (AS) surface coatings for premium readability in high-ambient glare.
Strengthened through potassium-ion exchange, offering up to 5x higher mechanical bending strength than ordinary float glass.
Meets EN 62262 standards, absorbing up to 20 Joules of physical impact energy without structural glass failure.
Integrates a safety film that secures shattered shards in place in case of failure, protecting operators from flying glass.
Multi-layer anti-reflective (AR) and chemical anti-glare (AG) coatings bounce away reflections to ensure crystal-clear vision.
Controller firmware calibrated to detect Projected Capacitive multi-touch signals through up to 6.0mm protective glass.
Heavy-duty milled aluminum bezels seal the glass face, preventing dust, water, and contaminants from entering the chassis.
Public interfaces, heavy industrial plants, and military vehicles require displays that can endure extreme stress. Our tempered glass monitors use premium cover glass chemically treated to create a deep compressive layer. This layer prevents micro-scratches from escalating into structural cracks. By incorporating anti-reflective lamination and index-matching, the displays preserve superior contrast while maintaining high optical transmission (>96%) and impact resilience.
Heavy-duty watertight circular power input with over-voltage and surge protection filters.
Watertight USB and video inputs designed to withstand extreme industrial environments.
Transparent heating element laminated to the glass back-face to melt frost down to -40°C.
Pressure balance valve to prevent sealing failure under sudden thermal or pressure shifts.
Customize the display stack, cover glass thickness, and board settings to match your exact deployment criteria.