A fully touchless HMI keyboard that recognises 3D air gestures - swipe, wave, hover and dwell - and outputs standard USB HID keycodes with under 50 ms latency. No physical contact, no contamination, no glove compatibility issues. IP65 sealed sensor window. Hybrid models combine gesture zones with physical keys for mixed-mode operation.
Sterile environments, chemical lines, food processing and medical theatres all share one problem: physical keyboards contaminate or are contaminated. Gesture control solves it permanently.
IR optical sensor array detects hand position and motion in X, Y and Z axes - recognising 8 standard gestures (swipe, wave, hover, dwell, push and custom) in any environmental light condition.
Gesture recognition, keycode generation and USB HID transmission complete in under 50 ms end-to-end - indistinguishable from a physical keystroke for the operator and the application.
Outputs standard HID keyboard keycodes over USB. No driver, no SDK, no OS configuration - works on Windows, Linux, embedded RTOS and bare-metal systems out of the box.
The IR sensor window is flush-sealed to IP65 - no apertures, no grilles, no exposed surfaces. Clean, spray and disinfect the keyboard face as aggressively as the environment demands.
Every gesture maps to any HID keycode, mouse button, modifier or macro via the included PC configuration utility. Reconfigure for a new workflow in minutes without firmware update.
Hybrid models combine a gesture zone for primary navigation with a sealed physical key zone for data entry - the best of both worlds for mixed-mode operator consoles.
The IR sensor array continuously scans the detection volume. When a hand enters the field, the onboard microcontroller classifies the motion pattern against the stored gesture library and immediately issues the mapped HID keycode over USB - exactly as if a physical key was pressed. The host sees a standard HID keyboard.
Factory-configured to the most common navigation keycodes. Every mapping can be changed in minutes via the PC configuration utility - no firmware update required.
Horizontal sweep from right to left across the detection zone
Horizontal sweep from left to right across the detection zone
Vertical sweep from bottom to top through the detection field
Vertical sweep from top to bottom through the detection field
Direct hand movement toward the sensor surface - z-axis push gesture
Hold hand stationary in the detection zone for a configurable dwell time
Rapid lateral oscillation - two-direction sweep within 500 ms
Train any hand-motion pattern to any HID keycode via the configuration utility
Tailor the gesture keyboard to your environment, hygiene class and integration requirements.